多相平衡规律在树脂再生过程中的应用研究

借助于三相平衡体系的性能分析，提出了一步法复苏再生阴离子交换树脂的新思路，从而实现阴离子交换树脂的再生和有机污染去除的同步性．对三相再生体系的再生能力，循环再生能力和树脂的有机污染去除能力进行了研究，并进行了基本性能测试和理论分析．结果表明三相再生体系能够很好的保持再生和循环再生效果，缓解了树脂的有机污染，一步复苏再生法具有理论可行性。     

磷铝杂原子固体酸催化剂催化合成乙酸异丙酯

以丙烯和乙酸为原料 ,自制的磷铝杂原子固体酸作催化剂催化合成了乙酸异丙酯 ,考察了反应温度、反应压力、反应空速 (LHSV)及催化剂用量对酯化反应的影响 ,同时考察了固体酸催化剂的重复使用性。确定了最佳合成条件 :反应压力 1 5MPa,反应温度 1 60℃ ,反应空速2 0h-1,催化剂用量 2 0g。在此条件下 ,酯化率可达 91 5 % ,乙酸异丙酯选择性达 99 0 % ,且催化剂的重复使用性良好。     

Anhydrous esterification of myristic acid with propylene: Ion exchange resin and acid-treated clay as catalysts

Anhydrous esterification of myristic acid with propylene was carried out in the temperature range of 110–145°C and pressure from 190–195 psig in the presence of Amberlyst-15 (cation exchange resin) and Filtrol-24 (acid-treated clay) as catalysts. The product ester, isopropyl myristate finds use in cosmetic and topical medicinal preparations where good absorption through the skin is desired. Filtrol-24 is the catalyst of choice, and the recommended operating temperature is 130°C with a pressure of 190 psig.     

Contribution oftrans-18∶1 acids from dairy fat to european diets

Twelve commercial samples of French butter, purchased in October–November, and 12 other samples, purchased in May–June, were analyzed with particular attention to theirtrans-octadecenoic acid contents. The isomeric fatty acids were quantitated by a combination of gas-liquid chromatography (GLC) of total fatty acids as isopropyl esters on a polar capillary column (CPSil 88) and of silver nitrate-impregnated thin-layer chromatography followed by GLC of the pooled saturated (used as internal standards) andtrans-octadecenoic acid fractions. Autumn butters contained 3.22±0.44%trans-octadecenoic acids (relative to total fatty acids), whereas those collected during the spring contained 4.28±0.47% (P<0.01). Minimum and maximum values for the two sets of butters were 2.46 (autumn) and 5.10% (spring), respectively. The annual mean value for thetrans-octadecenoic acid content in all butter samples was 3.8% of total fatty acids (ca. 2% for thetrans-11 18∶1 acid). This value allows calculation of the daily individual intake oftrans-octadecenoic acids from dairy products by populations of member states of the European Economic Community (EEC). It varies from 0.57 g (Portugal) to 1.66 g (Denmark). The mean value for the twelve countries of the EEC is 1.16 g/person/d, which is close to data published for the United States. In France, the consumption oftrans octadecenoic acids from dairy fat is higher than that from margarines (ca. 1.5 vs. 1.1 g/person/d).     

提高炼厂气综合利用水平的途径

公司将进行催化裂化装置、气体分馏装置改造。预计改造后的丙烯产量将达到5．0万t／a，丁烯等C4产品大大增加。聚丙烯是公司目前丙烯化工利用的唯一产品，年产量2万t，C4的化工利用尚属空白。因此开辟过剩丙烯利用新途径，带动C4产业发展，形成化工产业链，提高公司炼厂气的综合利用水平，具有重要意义。合成异丙醇或环氧丙烷，就是这样一个突破口。     

苯和二异丙苯烷基转移化反应的研究

研究了二异丙苯转移烷基化反应中，催化剂配制条件等因素对反应的影响，对均相条件下的二异丙苯转移烷基化反应动力学进行了研究，得到了反应动力学方程。     

Alkylation of Benzene with Isopropyl Alcohol over SAPO-5 Catalyst in an Integral Pressure Reactor

The alkylation of benzene with isopropyl alcohol was studied in an integral pressure reactor over silicon substituted aluminophosphate molecular sieves, SAPO-5. The influence of various process parameters such as temperature, pressure, time on stream, weight hourly space velocity, and mole ratio of reactants on cumene yield and selectivity were investigated. The activity of SAPO-5 was compared with that of Hbeta for this reaction under similar conditions and in the same reactor. At pressures higher than atmospheric, almost the theoretical maximum yields of cumene were achieved on this SAPO-5. Among the diisopropyl benzenes formed by the alkylation of cumene, the meta-isomer was found to form in a significant amount followed by the para-isomer. The ortho-isomer with relatively high strain energy of 4.26 kcal/mol was almost negligible. The cumene yield goes through a maximum in the temperature range 498-543 K studied. Cumene selectivity was found to decrease at higher temperatures, higher pressures and lower benzene to isopropanol mole ratios.     

Ionic liquids as electrolytes

Salts having a low melting point are liquid at room temperature, or even below, and form a new class of liquids usually called room temperature ionic liquids (RTIL). Information about RTILs can be found in the literature with such key words as: room temperature molten salt, low-temperature molten salt, ambient-temperature molten salt, liquid organic salt or simply ionic liquid. Their physicochemical properties are the same as high temperature ionic liquids, but the practical aspects of their maintenance or handling are different enough to merit a distinction. The class of ionic liquids, based on tetraalkylammonium cation and chloroaluminate anion, has been extensively studied since late 1970s of the XX century, following the works of Osteryoung. Systematic research on the application of chloroaluminate ionic liquids as solvents was performed in 1980s. However, ionic liquids based on aluminium halides are moisture sensitive. During the last decade an increasing number of new ionic liquids have been prepared and used as solvents. The general aim of this paper was to review the physical and chemical properties of RTILs from the point of view of their possible application as electrolytes in electrochemical processes and devices. The following points are discussed: melting and freezing, conductivity, viscosity, temperature dependence of conductivity, transport and transference numbers, electrochemical stability, possible application in aluminium electroplating, lithium batteries and in electrochemical capacitors.     

环丙烷甲酰氯的合成

环丙烷甲酸异丙酯因异丙基的位阻很大，所以其很难水解，即使加热回流12h，得率也只有68．6％，选用合适的相转移催化剂使得率超过了84％。由环丙烷甲酸制备环丙烷甲酰氯比较简单，文献报道得率为94．08％，通过对其合成条件的优化，使得率超过了97．2％。     

πSynthesis and evaluation of a series of α-hydroxy ethers derived from isopropyl oleate

Several fatty derivatives with bulky moieties were prepared by treatment of epoxidized isopropyl oleate with a number of alcohols in the presence of sulfuric acid catalyst to provide a series of α-hydroxy ethers in good yield. The materials were analyzed for cold flow performance through cloud point and pour point determinations. The most promising α-hydroxy ether produced in this study, with respect to both low temperature behavior and economic criteria, was isopropyl 9(10)-(2-ethylhexoxy) 10(9)-hydroxystearate, which has a cloud point of −23°C and pour point of −24°C.